PVC Plastic Aqua Maker, Water Tank Integrated Plastic Housing Evaporative Cooling Pad System
In poultry houses and greenhouses, traditional galvanized cooling pad housings used in evaporative cooling (celdek) systems are continuously exposed to water and humidity, causing them to corrode and become unusable within 5–10 years. As Aqua Maker, with over 20 years of field experience, we identified this issue and developed its solution: a PVC plastic self-contained evaporative cooling pad system with integrated water reservoir.
Why Should Aqua Maker Be Preferred?
With its PVC structure that never corrodes or rusts, this system provides a long-lasting evaporative cooling pad frame infrastructure and is manufactured locally in our own facility in the required dimensions. Pimtaş products are used in our connection equipment. The Aqua Maker structure is made entirely of PVC plastic components. Auxiliary equipment consists of Pimtaş products whose quality and reliability have been proven.
- Non-corrosive, rust-proof PVC structure
- Domestic production in our own facility
- Production in desired dimensions
- Pimtaş connection equipment
- Long service life
- Suitable structure for evaporative cooling systems
Differences Between PVC Plastic Aqua Maker Evaporative Cooling Frame and Galvanized Housing
Evaporative cooling pads (celdek) systems operate with the pad housing in continuous contact with water. Housings made of galvanized sheet metal corrode over time due to the abrasive effect of water and become perforated and unusable within 5–10 years. This reduces pad efficiency, causes water leakage, and increases maintenance costs. The Aqua Maker PVC plastic cooling pad system, on the other hand, is manufactured from UV-resistant, high-strength PVC material, making it fully resistant to the effects of water, humidity, acidic environments, and sunlight.
Comparison of Aqua Maker PVC Plastic Evaporative (Celdek) Frame and Galvanized Cooling Pad Housing
| FEATURE | GALVANIZED COOLING PAD HOUSING | AQUA MAKER PVC PLASTIC PAD FRAME |
|---|---|---|
| Corrosion Resistance | Corrodes and becomes perforated within 5-10 years | Never corrodes or rusts |
| UV Resistance | Paint peels over time | UV-resistant PVC, no color fading |
| Water Resistance | Wears out under continuous water contact | Fully resistant to the abrasive effect of water |
| Weight | Heavy, difficult to transport | Lighter, easy installation |
| Maintenance Cost | Difficult to clean, corroded parts must be replaced, labor cost is high. | Easy and effortless cleaning thanks to the integrated drain valve, Low maintenance cost, long service life |
| Custom Size | Standard dimensions, limited flexibility | Custom manufacturing in desired dimensions |
| Production | Standard market product | AQUA MAKER domestic manufacturing |
| Installation | Difficult and costly labor | Ready for immediate use with its all-in-one design that does not require an extra water tank. |
Key Features
🛡️ Non-Corrosive and Rust-Free Structure
The Aqua Maker self-contained cooling pad frame provides complete protection against the abrasive effects of water, humidity, and acidic environments thanks to its high-strength PVC material, unlike galvanized housings. The frame never corrodes throughout its service life.
📐 Custom Manufacturing in Desired Dimensions
We manufacture Aqua Maker PVC plastic cooling pad frames and PVC plastic pad housings locally in our own facility. We can produce custom dimensions according to the measurements of your facility. Pimtaş products are used in our connection equipment. Low-quality connection equipment is not used. Its modular structure allows easy installation.
☀️ UV-Resistant Outer Body and Connection Equipment
Pad housings installed on roofs or exterior façades are constantly exposed to sunlight. Our UV-resistant PVC structure does not become brittle or fade under the sun. It provides high resistance against breakage and cracking.
🔄 Cooling Pad Compatibility
Aqua Maker PVC plastic cooling pad frame housings are fully compatible with Aqua Maker cellulose cooling pads (celdek). Pad replacement can be carried out easily and practically.
How Does the Aqua Maker PVC Plastic Evaporative Cooling Pad Frame System Work?
The Aqua Maker PVC plastic self-contained evaporative cooling pad (celdek) system is installed on one side of the building. While industrial exhaust fans placed on the opposite side extract the indoor air, the fresh outdoor air passes through the wet cellulose evaporative cooling pads inside the plastic housing and enters the interior. During this passage, the air is cooled and filtered. This is called the “Pad-Fan system” and is one of the most efficient evaporative pad (celdek) cooling methods in industrial facilities.
AQUA MAKER PVC PLASTIC COOLING PAD FRAME Usage Areas
🏭 Factories and Workshops
PVC plastic self-contained cooling pad frame system for wall-type evaporative (celdek) cooling in large-volume production facilities.
🐔 Poultry Houses and Chicken Farms
The Aqua Maker PVC plastic cooling system offers a much longer service life than galvanized systems in poultry ventilation applications thanks to its resistance to ammonia and humidity.
🌿 Greenhouses
In greenhouse cooling systems, it provides a rust-free infrastructure for pad-fan applications used together with exhaust fans and is suitable for longer-term trouble-free operation. Aqua Maker PVC plastic self-contained water reservoir system.
Has Your Galvanized Cooling Pad Housing Corroded in Your Poultry Houses and Greenhouses?
If you are experiencing galvanized housing corrosion in your existing evaporative cooling system, you can replace it with the Aqua Maker PVC plastic housed pad system. We produce custom units according to the dimensions of your current system. Enjoy efficient cooling for many years without facing corrosion problems again.
AQUA MAKER, Evaporative Cooling (CELDEK) Solution
We offer a complete cooling and ventilation system together with the Aqua Maker PVC plastic self-contained water reservoir pad system, evaporative cellulose cooling pads (CELDEK), industrial evaporative coolers, and exhaust fans. You can also review our fabric ventilation duct solutions for homogeneous distribution of cool air inside the facility. We are at your side with the advantage of a complete solution under one roof.